Specifications

Flash photography is direct metering system and light is measured off the film plane
to control the flash duration. This make possible a world of special applications as
well as the ultimate in "Point and Shoot" simplicity.
1. Slide the flash unit into the Hot Shoe and tighten it with the lock screw. (Fig. 39)
2. Set the Shutter Speed Dial to ''A". (Fig. 40)
3. Set the F-Stop Ring to "P". (Fig. 41 )
4. Set the Program Selector to "P". (Fig. 42)
5. Set the flash A/M selector to "A''. (Fig. 43)
6. Turn the flash power on-off switch ON. (Fig. 44)