Specifications

5. Close and press the Back Cover firmly to lock it.
Unfold the Film Rewind Crank and turn it gently in the
direction of the arrow until the slack in the film has
been taken up (Fig. 13)
6. Advance the film and press the Shutter
Release Button a few times until the number
"1''appears in the Exposure Counter. As you
advance the Film Advance Lever, the Film
Rewind Knob rotates indicating that the film is
properly advancing. (Fig. 14)
* When inserting the film. it is more convenient
to set the Shutter Speed Dial to a high speed
rather than A (Auto) while advancing the film to
the number 1 position. to avoid a slow shutter
speed (the slowest is 16 seconds). When you
are ready for shooting. be sure to set the Shutter
Speed Dial back to A (Auto).
* When inserting the film in cold conditions, the
Film Leader may become hard and brittle. Keep
the leader warm in your hand before insertion.