Specifications

* Do not use other makes of flash units that have special signal pins exclusively for their

cameras, as this will result in incorrect exposure and may damage the circuitry of the

camera.

* If the Shutter Release Button is pressed before the Flash Ready LED Light Lights up.

the shutter speed will be the one indicated by the Shutter Speed Indicator.

FLASH PHOTOGRAPHY (2)

1. Set the Shutter Speed Dial to the synchronizing speed of

1/125 sec. (Fig. 36)

* It is convenient to use the quick reference table on MANUAL

flash units, which show the recommended f-stop numbers for

specific distances.

* When using other flash units. please follow the instructions

with that flash units.

MULTIPLE EXPOSURE PHOTOGRAPHY

Multiple exposure is a device to put more than one exposure

into the same frame. (Fig. 37)

1. Press the Shutter Release Button to obtain the first

exposure.

2. Slide the ME Lock Lever to the left until the red dot

appears. (Fig. 38)

3. Advance the Film Advance Lever while keeping the

ME Button pressed down. (Fig. 39)