Specifications

the camera, and it will remain locked into position. (Fig. 26)
2. Unfold the Film Rewind Crank and turn it in the direction of
the arrow. When the film has been completely rewound. the
tension of the Film Rewind Crank is released and it will revolve
freely. (Fig. 27)
3. Pull up the film rewind Knob to its fullest extent and the Back
Cover will open. (Fig. 28) Remove the film. push the Film
Rewind Knob back into position and close the Back Cover.
* Never open the Back Cover during rewinding, as light will get
in and ruin your film.
* If you wind the film beyond the set number of frames the Film
Wind Lever sometimes gets stuck midway and the Film Rewind
Release Button cannot be locked in the down position. If this
should happen. rewind the film by keeping the Film Rewind
Release Button pressed down with your finger.
AE LOCK SYSTEM