Specifications

viewfinder will disappear. By pressing the shutter button halfway, the display
will appear.
· If the camera is not operated for about 30 seconds, the display on the LCD
panel will disappear. By pressing the shutter button halfway, the display will
appear.
2. Confirm that the viewfinder display is operating. (Fig. 44)
Fig. 44 indicates the viewfinder display in Auto operation.
The number denotes the current shutter speed. Note that the viewfinder display
may vary slightly according to the current operation (i.e., Auto or Manual) and
settings (i.e.,
AE lock, exposure metering, flash, bulb, and exposure compensation settings).
· When a slow shutter speed has been set, use a tripod to prevent camera shake.
3. Press the shutter button. (Fig. 45)
· The film advances when the shutter is released.
19. REWINDING THE FILM
1. When the film has reached the end, the film rewinds to completion
automatically while the exposure counter counts down. (Fig. 46)
· When the film is completely rewound, the exposure counter displays "E".
(Fig. 47)
2. While pressing the back cover lock release button, slide the back cover
latch down and open the back cover.
3. Remove the film.
· When you are in a quiet location and the noise produced during film
rewinding is disturbing, set the main switch selector to L (Lock) to turn off
the power. Rewinding will be temporarily stopped. When the main switch
selector is set to A (Auto) or M (Manual), the film will resume rewinding.
· If the manual rewind button is pressed while the film is rewinding, the
film leader will not be rewound completely so that a portion of the film
leader protrudes from the film cassette.