Specifications

Enables manual user-selected aperture and shutter speed settings for individual creative effects or difficult lighting
conditions.
· The LCD panel and the viewfinder display operate when A (Auto) or M (Manual) is selected.
· If there is a film loaded in the camera, the film speed will be displayed for the first 2 seconds.
2. Check the batteries.
· Refer to "MONITORING THE CONDITION OF THE BATTERIES" on page 14.
· If the main switch selector is set to L (Lock), the power will be completely cut off. The LCD panel and the
viewfinder display will not operate.
· The following modes will be canceled when the main switch selector is set to L (Lock).
· AE Lock setting (in the Preview/AE Lock User Setting mode)
· Self-timer mode
· To prevent unnecessary battery depletion, set the main switch selector to L (Lock) when you are not using the
camera.
Auto Power Off Function
If the camera controls. are not operated or camera operations** are not performed for about 30 seconds, the display
will disappear on the LCD panel. At this time, if the shutter button is pressed lightly halfway, the display will appear
again. ~ All buttons, mode dial, and main switch selector. ** Shooting, film loading, and film rewinding.
· The mode settings selected before the display disappears, will not be canceled.
· When the Auto Power Off function operates and the display disappears on the LCD panel, only the following can be
operated so that the display will appear again: shutter button, manual rewind button and the main switch selector. To
set or change the mode settings, press the shutter button halfway to operate the LCD panel.
· If the camera is not operated for about 10 seconds, the display inside the viewfinder will disappear. By pressing the
shutter button halfway, the display will appear.