Specifications

1. Press the up/down buttons until the exposure indicator is displayed. (Fig. 74)
The exposure indicator is displayed in the viewfinder display. The exposure
compensation value is displayed on the LCD panel also.
· The exposure indicator appears flashing in the viewfinder display. This allows
you to set the exposure compensation while looking through the viewfinder.
· If you do not make any changes (i.e., exposure compensation remains set to 0
EV) within 5 seconds after pressing the up/down buttons, the exposure indicator
in the viewfinder display will disappear. If you are adjusting a previous
exposure compensation value, the exposure indicator will remain in the
viewfinder display.4www.butkus.org
2. Press the up/down buttons to set the desired exposure compensation value.
Each time the up or down button is pressed, the exposure compensation value
increases or decreases in 0.5 EV increments. Press and hold down the up or
down button to increase or decrease the exposure compensation value
continuously within the range of +4 EV in 0.5 EV increments.
· The dot (A) of the exposure indicator flashes when the exposure compensation
exceeds +1 EV or-1 EV. (Fig. 75)
· When you have finished shooting with exposure compensation, be sure to
restore the exposure compensation value to 0 EV.
A (AUTO) AND M (MANUAL) OPERATIONS
13. MAIN SWITCH SELECTOR--L/A/M
1. Set the main switch selector to the desired operation.
(Fig. 23)
L (Lock)
Locks the operations and turns off the camera. Set to L
(Lock) when the camera is not used.
A (Auto ~ P. 18)
Selects optimum shutter speed automatically according to the user-selected aperture for creative control of the depth
of field.
4www.butkus.org
M (Manual ~ P. 19)