Specifications

· If the LCD panel is not operating, press the shutter button halfway and the
display will appear. The mode cannot be set when the LCD panel is not
operating.
3. Press the Preview/AE lock button. (Fig. 69) The exposure value is locked.
The "AEL" mark flashes in the viewfinder display and "AEL" remains lit on
the LCD panel in all modes except the Exposure Metering User Setting and
ISO User Setting modes.
4. Compose your picture and press the shutter button.
The picture is taken with the locked exposure value. When the picture is taken, AE lock will be canceled and the
"AEL" mark will disappear.
· If the aperture is changed while an exposure value is locked in Auto operation, the camera will adjust the shutter
speed to correspond to the exposure value that is locked.
· To cancel AE lock before releasing the shutter, press the preview/AE lock button again or set the main switch
selector to L (Lock) to turn off the power.
· If the preview/AE lock button is kept pressed while shooting, it is possible to shoot repeatedly with the locked
exposure value.
28. ISO USER SETTING MODE
The ISO User Setting mode is set when "ISO" is displayed on the LCD panel.
(Fig. 70)
The ISO User Setting mode allows setting for ISO manual override of the film
for advanced applications. Under normal conditions, the camera sets the ISO
film speed for DX-coded films ranging from ISO 25 to 5000 automatically
(ISO 12 to 6400 for manual override setting).
4www.butkus.or g
The manual ISO setting has priority over the automatic DX coded setting.
This mode is used to set the film speed for non-Ding films, or to set a different
film speed than that specified for DX-coded films.