Specifications

1. Turn the mode dial to select (Auto Bracketing mode). (Fig. 57)
2. Press the shutter button.
· The camera will take 3 frames in the following order: underexposed (-0.5
EV), correctly exposed (O EV), and overexposed (+0.5 EV).
· To cancel the Auto Bracketing mode, turn the mode dial to select another
mode.
· When the Auto Bracketing mode is combined with exposure
compensation or AE lock, the exposure range will be based on the selected
exposure compensation value or the locked exposure value respectively.
For example, when exposure compensation or the locked exposure value is
-1.0 EV: the exposure range will be -1.5 EV, -1.0 EV, and -0.5 EV.
· The Auto Bracketing mode is applicable for Manual operation also.4www.butkus.org
· The Auto Bracketing mode cannot be combined with flash photography
(i.e., Ricoh flash units such as the Speedlite 303P, 323, 403P, etc.).
· The Auto Bracketing mode is not applicable when the shutter speed is set
to "bulb".
24. CONTINUOUS SHOOTING MODE
Continuous shooting occurs for as long as you press the shutter button in the
Continuous Shooting mode.
1. Turn the mode dial to select
(Continuous Shooting mode). (Fig. 58)
2. Press the shutter button. Continuous shooting is enabled as long as the
shutter button is pressed.
· To cancel the Continuous Shooting mode, turn the mode dial to select
another mode, or set the main switch selector to L (Lock) to turn off the
power.
25. NORMAL MODE
When done with using other modes, set the camera to the Normal mode.
Under normal conditions, the camera should be set to the Normal mode.4www.butkus.or g
1. Turn the mode dial to select -- (Normal mode). (Fig. 59) When you do
not wish to operate the Self-timer, Multi Exposure, Auto Bracketing, or
Continuous Shooting mode, and do not require to change the Exposure
Metering User Setting, Preview/AE Lock User Setting, or ISO User Setting