Specifications

1. LOCATING THE CONTROLS
When reading this manual, refer to "locating the controls" (fold out the front and back covers)
Click here for LOCATING THE CONTROLS page
Click here for LOCATING THE CONTROLS page - 2
Click here for the FUNCTION MAP
Click here for the FUNCTION MAP - page 2
Click here for the FUNCTION MAP - page 3
Click here for the FUNCTION MAP - page 4
Click here for the FUNCTION MAP - page 5
Click here for the LCD INFORMATION page
Reading the Exposure Indicator The exposure indicator is displayed in the viewfinder display and the exposure
compensation value is displayed on the LCD panel in the following conditions:
· In Manual operation
· When the exposure compensation has been set.4www.butkus.org
· When the exposure compensation is being set.
In Manual operation or for exposure compensation, the exposure indicator in the viewfinder display indicates the
difference between the correct exposure value (EV) and the current exposure compensation setting.
Click here for the VIEWFINDER DISPLAY page
Click here for the VIEWFINDER DISPLAY page -2
The * mark flashes when the value exceeds -1 EV or +1 EV.
Exposure compensation can be set within the range of +/- 4 EV in 0.5 EV increments. The shutter speed in the
viewfinder display flashes when the current exposure setting is beyond the exposure metering range. However, the
overexposure or underexposure can still be taken deliberately to capture a particular creative effect. Nevertheless, to
avoid incorrect exposure, select a larger or smaller aperture, select a faster or slower shutter speed, or use a flash unit
as necessary.
4. QUICK GUIDE IN AUTO OPERATION
The following is a quick overview of the Auto Operation. For more detailed information, refer to "A (AUTO) AND
M (MANUAL) OPERATIONS" on page 17.