Specifications

· The following modes will be canceled when the main switch selector is set to L (Lock).
· AE Lock setting (in the Preview/AE Lock User Setting mode)
· Self-timer mode
· To prevent unnecessary battery depletion, set the main switch selector to L (Lock) when you are not using the
camera.
Auto Power Off Function
If the camera controls. are not operated or camera operations** are not performed for about 30 seconds, the display
will disappear on the LCD panel. At this time, if the shutter button is pressed lightly halfway, the display will appear
again. ~ All buttons, mode dial, and main switch selector. ** Shooting, film loading, and film rewinding.
· The mode settings selected before the display disappears, will not be canceled.
· When the Auto Power Off function operates and the display disappears on the LCD panel, only the following can be
operated so that the display will appear again: shutter button, manual rewind button and the main switch selector. To
set or change the mode settings, press the shutter button halfway to operate the LCD panel.
· If the camera is not operated for about 10 seconds, the display inside the viewfinder will disappear. By pressing the
shutter button halfway, the display will appear.
14. A (AUTO) OPERATION
The camera is set to A (Auto) operation when the following viewfinder
display appears. Note that the viewfinder display may vary slightly according
to the current shutter speed and settings (i.e., AE lock, exposure metering,
flash, bulb, and exposure compensation settings). (Fig. 24)
· If the LCD panel or viewfinder display is not operating, press the shutter
button halfway and the display will appear.
1. Set the main switch selector to A (Auto). (Fig. 25)
Make sure that the mode dial is set to either Self-timer4www.butkus.org
Multi Exposure, Auto Bracketing, Continuous Shooting, or Normal mode.
2. Set to the desired lens aperture. (Fig. 26)
· If the aperture is set to "P" or "A", turn the aperture ring while pressing the
~ P" or "A" lock pin.