Operation Manual

3
Directly Entering the Destination to Call
1. Press the cursor keys to select [Connect Without Registering Destination], and then press the
[Enter] key.
2. Enter the destination address.
Enter the destination address you confi rmed in page 2 “Confi rming the Destination Address to Connect”.
For details about how to enter the destination address, see “Entering Characters", Operating Instructions.
The following table lists examples of entering the destination address for each of the cases above:
Destina-
tion
Input format
Input example
Information of the destination Input
Device
<Global IP address> IP address: 192.168.1.2 192.168.1.2
<FQDN> FQDN: mydomain.com mydomain.com
MCU *1
<Global IP address>,
<Meeting ID>
IP address: 192.168.1.2
Meeting ID: 2001
192.168.1.2,2001
<FQDN>,<Meeting ID>
FQDN: mydomain.com
Meeting ID: 2001
mydomain.com,2001
*1 A comma (,) must be entered between the IP address / FQDN and the meeting ID.
3. Press the cursor keys to select [Connect], and then press the [Enter] key.
A call is made to the destination. When the destination answers the call, the meeting starts.
The entered destination address is held until the system returns to the Features screen.•