Quick Reference Guide

Connecting an Ethernet Cable

To use a wired network, connect the machine to a network connection device such as a hub or modem.

• Make sure the machine is off before connecting an Ethernet cable.

• Make sure the Ethernet cable is connected to a hub. Do not connect to a network switch.

• Use the following Ethernet cables.

• When using 100BASE-TX/10BASE-T:

Unshielded Twisted Pair Cable (UTP) or Shielded Twisted Pair Cable (STP) and Category type

5 or more

• When using 1000BASE-T:

Unshielded Twisted Pair Cable (UTP) or Shielded Twisted Pair Cable (STP) and Category type

5e or more

1. Connect the Ethernet cable to the Ethernet port on this machine.

CJB100

2. Connect the other end of the Ethernet cable to the network connection device.

• An Ethernet cable connection is not required for a wireless network.

1. Preparing to Use the Machine