Quick Reference Guide

• Do not use the product on soft material such as paper or cloth that might get sucked into the air
inlet. Doing so may cause heat buildup inside the product, resulting in malfunction, burns, or
fire.
• Do not place the power cord and connection cable in a way that might cause someone to trip
and fall. The product might fall over and cause an injury.
• Do not place the product in a location where air flow is poor. Doing so may cause fire due to
internal components becoming overheated.
• Do not place or store the product in a location where direct sunlight or heat generation might
occur. The heat may deform or wear out the exterior parts or negatively affect internal parts.
Doing so could result in fire.
• Do not place low heat resistant objects near the air outlet. Hot air may come from the air outlet,
resulting in damage to the object or an accident.
• Do not expose the product to salt air or corrosive gas. Also, do not place the product in a
laboratory or other location where a chemical reaction might occur. Doing so may cause the
product to malfunction.
• Do not obstruct the machine's air inlet or outlet. Doing so risks fire caused by overheated
internal components.
• Do not use or store this machine in a place that is exposed to soot, cigarette smoke, or any other
type of smoke. Doing so may soil the machine, resulting in shorter product life and lower video
quality.
• Abrupt changes in temperature may cause drops of water to form inside the machine, resulting in a
phenomenon called dew condensation. Continuing to use the machine in this condition may lead to
product failure or malfunction. If dew condensation forms, wait until the drops of water evaporate
before using the machine.
1. Preparing to Use the Machine
18