Quick Reference Guide

1. Preparing to Use the Machine
Preparing to Start Using the Services
To start using the Unified Communication System services with this machine, you must set up this machine
to use the services according to the conditions in which the machine was purchased and the environment
in which the machine is used. This involves specifying the name of the machine and your password,
configuring the network settings, and registering contact.
Preparing the machine
Step Reference
1 Checking the Package contents. p.11 "Checking the Package
Contents"
2 Installing the machine. p.17 "Place to Install"
3 Connecting the power cord set. p.24 "Connecting the Power
Cord Set"
4 Connecting a video output cable. p.27 "Connecting a Video
Output Device"
5 Connecting an Ethernet cable. (If using a wired network) p.28 "Connecting an Ethernet
Cable"
6 Turning on the power. p.33 "Turning On the Power"
7 Selecting the language and time zone. p.34 "Turning on the Machine
for the First Time"
8 Specifying Wired/Wireless Network Configuration. "Changing Network
Configuration", Features
Reference
"When the Machine Cannot
Connect to the Network",
Features Reference
9 Checking the Contact ID from the Contact List screen. "About Screen", Features
Reference
9