Specifications

39
Troubleshooting UC5
Normally, your UC5 will function correctly with no user intervention. If
there is a problem use this section as a guide to solve it.
Problem: The following message is printed when I try to print a docu-
ment: There was an error writing to LPT1: for the printer...
The printer is not ready. Make sure it is turned on and
on-line.
Try the following: a) Check all physical cable connection and power.
b) Reset the UC5.
c) Check you are not trying to print to the UC5 across a
network. If this is the case see your windows documenta-
tion on network printing.
d) Check the parallel port is set to “ECP” mode.
Problem: Print jobs download to the UC5, but the Digital Duplicator
does not create a master.
Try the following a) Press the Digital Duplicator “on-line” key. Some Dupli-
cators do not support Auto on-line functions. Check that
your Duplicators Auto on-line function has been enabled.
Check also that the last print run on the Digital Duplicator
has been completed.
b) Turn the Digital Duplicator off then on.
Problem: Activity light on the UC5 is permanently on, but no master is
created.
Try the following: Press the reset button on the UC5.