Specifications

11.1.4 Double Copy Registration
NOTE:
1) Perform this adjustment after completing the registration
adjustment and the blank margin adjustment for single copies.
2) Select the double copies mode by the Double Copies key using
the copy mode to print the test pattern.
1. If you need to adjust the double copy registration, use SP1-006.
11.2 SCANNING
NOTE:
1) Perform or check the printing registration/side-to-side adjustment
and the blank margin adjustment, before doing the following
scanner adjustment.
2) Use an OS-A3 test chart to perform the following adjustments.
11.2.1 Registration: Platen Mode
1. Place the test chart on the exposure glass and make a copy from one of
the feed stations.
2. Check the leading edge and side-to-side registration, and adjust them
using the following SP modes if necessary.
SP mode
Leading edge SP4-010
Side-to-side SP4-011
A
A: Double Copy Registration
A193R514.wmf
B
A
A: Leading Edge Registration
B: Side-to-side Registration
A193R515.wmf
1 August 1996 COPY ADJUSTMENT PRINTING/SCANNING
6-41