Specifications

Menu Settings
93
5
Maintenance Menu
This section describes two settings you can make with the “Maintenance” menu.
Note
❒ Italicized settings indicate default settings.
❖
❖❖
❖ Ethernet
You can select the data transfer speed when using the network interface
board.
• Auto
• 10 Mbps
• 100 Mbps
❖
❖❖
❖ Prt.Priority
You can select the timing for printing and paper feeding operation within the
printer. Use the “Speed” setting so that the printer performs both the printing
and paper feeding at the same time. Use the “Quality” setting so that the
printer does not perform paper feeding during printing. Thus the print qual-
ity is more stabilized, while printing speed becomes slower than when select-
ing the “Speed” setting.
• Speed
• Quality
Changing the Printer Language
This section describes how to change the printer language on the operation pan-
el. Changing IPDL-C or RICOH-SCRIPT2 (RPS2) is required when you set the
menu for each printer language.
A
Press {
{{
{Menu}
}}
}.
The following message appears on the panel display.
<Menu> j
IPDL-C Menu l
Power On Line Data In
Reset
EscapeMenu
Media Enter
Error
ZDHS031E