Specifications

Connecting Communication Equipment

Removing the Communication Card

When you have finished communicating, remove the communication card from

the camera.

Important

Note

• Make sure that the camera is turned off before removing the

communication card from the camera. If the power is left on, it may

result in failure of the card or malfunction of the camera.

A Check that the camera power is

turned off.

B Remove the connection cable from

the communication card.

Note

• For details of how to remove the

cable, refer also to the instruction

manual supplied with the

communication card.

C Open the EJECT lever cover, erect the

PC card EJECT lever and push it.

The communication card will be pushed out a

little way.

D Remove the communication card

from the PC card slot by pulling it

straight out.

E Set the PC card EJECT lever to its

original position and close the EJECT

lever cover.

Important

Note

• Do not remove the communication card from the camera during

communication as this may result in failure of the card.

Note

• For removing a communication card for mobile phone, perform the

above steps A,C,D and E.