Specifications

Setting the Communication Function

● Telephone Number

This is the telephone number of the connection. Input the telephone number to

which the receiving computer (modem) is connected. (Example: xxx-xxxx-xxxx)

● Dial Type

If you are using an ordinary telephone line, choose the type of line. Select

for either TONE or PULSE. The factory default setting is TONE. If you are using

an ISDN or mobile phone, leave the setting on TONE.

• TONE : Short beeps are heard when dialing

• PULSE : Long beeps are heard when dialing

Note

• If the type of telephone line is not correctly set, no connection will be

made. If you do not know which type of telephone line you use,

contact the telephone company.

● External Call

When making an external call from an internal phone of the office, input

numbers from 0 to 9 to set the external call number. When the external call

number is set, it is added in front of the telephone number and dialed before the

telephone number. If you do not need an external call number, leave blank.

● PPP Account

Input the connecting computer’s name (Example: testname)

Select [Start] → [Settings] → [Control Panel] → [Network] → [Identification].

Input the computer name for the PPP account.

Note

• The above explanation is Windows 98 based. The procedure for

Windows 2000 varies.