Specifications

Setting the Communication Function

• TONE : Short beeps are heard when dialing

• PULSE : Long beeps are heard when dialing

Note

• If the type of telephone line is not correctly set, no connection will be

made. If you do not know which type of telephone line you use,

contact the telephone company.

● External Call

When making an external call from an internal phone of the office, input

numbers from 0 to 9 to set the external call number. When the external call

number is set, it is added in front of the telephone number and dialed before the

telephone number. If you do not need an external call number, leave blank.

● PPP Account

This is the account name (the name of the contractor) for accessing the

Internet. It is also called User name, User ID, etc. (Example: testname)

● PPP Password

This is the password for accessing the Internet. Input the password in

characters. (Example: 1234ABCD)

Important

Note

• Take note of the following when entering the account and password.

* the difference between uppercase and lowercase letters

* the difference between the number “0” (zero) and the alphabet letter

“O”

* the difference between the number “1” (one) and the alphabet letters

“I” (capital i) and “l” (small L).

• Your password is very important. Make a note of your password and

keep it safe, out of sight.

● Primary Name Server

● Secondary Name Server

This is the IP address of the name server managed by your provider or system

administrator. If you have not been supplied with the address by your provider

or system administrator, leave blank. (Example: xxx.xxx.xxx.xxx)

Important

Note

• The internet function does not work properly unless you specify the

name server. Be sure to specify the name server.

Note

• The primary name server is the server you normally use. If this server

fails to function, the secondary name server will be used as an

emergency server.