RDC-6000 Windows XP Installation Guide
CONTENTS 1. 2. 3. 4. End User License Agreement ..............................................................................................................3 Important notes ....................................................................................................................................4 Customer support.................................................................................................................................4 Installing the USB driver.............................
1. End User License Agreement The following is a legal software license agreement between you, the software end user, and Ricoh Company Ltd. Carefully read this license agreement before using the product. Using the product indicates that you have read this license agreement and agree to its terms. Grant of License This license permits you to use one copy of the software included in this package on any single computer.
2. Important notes These instructions will guide you through the process of installing the RDC-6000 USB driver and utility software on your Windows XP computer. Be sure to read, understand, and observe all precautions and requirements prior to attempting these procedures. If you feel you need assistance, please contact our customer support network at the URL listed in the Customer support section below.
(5) At this point, a warning message will appear, but it can safely be ignored. Click Continue Anyway to continue. (See Figure 3.) (6) Click Finish when the wizard completes the installation. (See Figure 4.) Figure 2: Specify driver location Figure 3: Warning message Figure 4: Installation complete 5. Installing the utility software I. Prior to installation (1) Save any important data you may be using and then quit all running applications. II.
. Installing the TWAIN driver (1) Browse to the folder where you have stored the TWAIN driver, then click setup.exe. (2) Click Next at the Welcome screen. (3) Enter your name and company at the prompt and click Next. (4) Click Finish when Windows notifies you that the installation is complete. 7. Installing the video driver (1) Browse to the folder where you have stored the video driver, then click setup.exe. (2) Click Next at the Welcome screen.
II. Uninstalling the USB driver (1) Connect the camera to the computer via the USB cable. Make sure the mode dial is set to PC Mode, then turn the camera on. (2) Select the System icon from the Control Panel. Select the Hardware tab from the System Properties window that appears. (3) In the Hardware tab, click the Device Manager button. (4) In the device manager, click on the plus sign (+) beside Universal Serial Bus controllers, then select RICOH RDC-6000.
