Printer/Scanner Product Manual
Table Of Contents
- Printer/Scanner Unit Type 8000 Operating Instructions
- Manuals for This Machine
- TABLE OF CONTENTS
- How to Read This Manual
- About the Scanner Functions
- Display Panel
- Scanner Features
- 1. Sending Scan Files by E-mail
- Before Sending Scan Files by E-mail
- Basic Operation for Sending Scan Files by E-mail
- Switching to the E-mail Screen
- Specifying E-mail Destinations
- Specifying the E-mail Sender
- Specifying the E-mail Subject
- Specifying the E-mail Message
- Simultaneous Storage and Sending by E-mail
- 2. Sending Scan Files to Folders
- Before Sending Files by Scan to Folder
- Basic Operations When Using Scan to Folder
- Switching to the Scan to Folder Screen
- Specifying Scan to Folder Destinations
- Simultaneous Storage and Sending by Scan to Folder
- 3. Storing Files Using the Scanner Function
- 4. Delivering Scan Files
- 5. Scanning Originals with the Network TWAIN Scanner
- 6. Various Scan Settings
- 7. Appendix
- INDEX
Delivering Scan Files
86
4
Preparing to Deliver a File
This section describes the preparations and settings for delivering scan files.
Important
❒ To use the network delivery scanner, you need a delivery server on which an
application such as the optional the ScanRouter delivery software is installed.
For details about the ScanRouter delivery software, see the manuals supplied
with the ScanRouter delivery software.
❒ To view files delivered to an in-tray, DeskTopBinder must be installed on the
client computer.
A Connect the machine to the network.
Connect the machine to the network using an Ethernet cable or wireless LAN
(IEEE 802.11b).
B Make the necessary network settings in [System Settings].
If you have connected the machine to the network using an Ethernet cable,
make the following settings. For details, see General Settings Guide.
• Specify the machine’s IPv4 address and subnet mask
•In [Effective Protocol], enable [IPv4]
•Set [Delivery Option] to [On]
C If necessary, change settings in [Send Settings] under [Scanner Features].
D Using the ScanRouter delivery software, register this machine as an I/O de-
vice. In addition, specify register destinations and specify such settings as
the delivery type and sender.
For details, see the manuals supplied with the ScanRouter delivery software.
Note
❒ To connect the machine to the network using a wireless LAN (IEEE
802.11b), an extended wireless LAN board is required respectively. For de-
tails, see Network Guide.
❒ Items to set up in [System Settings] vary depending on the network environ-
ment. For details about the network settings, see General Settings Guide.
❒ For details about installing DeskTopBinder Lite, see “Installing DeskTop-
Binder Lite from the Supplied CD-ROM”.
Reference
p.87 “Installing DeskTopBinder Lite from the Supplied CD-ROM”