Printer/Scanner Product Manual
Table Of Contents
- Printer/Scanner Unit Type 8000 Operating Instructions
- Manuals for This Machine
- TABLE OF CONTENTS
- How to Read This Manual
- About the Scanner Functions
- Display Panel
- Scanner Features
- 1. Sending Scan Files by E-mail
- Before Sending Scan Files by E-mail
- Basic Operation for Sending Scan Files by E-mail
- Switching to the E-mail Screen
- Specifying E-mail Destinations
- Specifying the E-mail Sender
- Specifying the E-mail Subject
- Specifying the E-mail Message
- Simultaneous Storage and Sending by E-mail
- 2. Sending Scan Files to Folders
- Before Sending Files by Scan to Folder
- Basic Operations When Using Scan to Folder
- Switching to the Scan to Folder Screen
- Specifying Scan to Folder Destinations
- Simultaneous Storage and Sending by Scan to Folder
- 3. Storing Files Using the Scanner Function
- 4. Delivering Scan Files
- 5. Scanning Originals with the Network TWAIN Scanner
- 6. Various Scan Settings
- 7. Appendix
- INDEX
Sending Scan Files to Folders
54
2
Sending Files to an FTP Server
This section explains how to specify destinations when sending files to an FTP
server.
Entering the path to an FTP server manually
You can enter the path to an FTP server manually.
A Press [Manual Entry].
B Press [FTP].
C Press [Manual Entry] on the right side of the server name field.
The soft keyboard appears.
D Enter a server name.
Instead of specifying the destination using its path, you can also use its IPv4
address.
E Press [Manual Entry] on the right side of the path field.
F Enter the path for the folder.
The following is an example of a path where the folder name is “user” and the
subfolder name is “lib”: user\lib.
G Press [OK].
H Enter the user name according to the setting at the destination.
Press [Manual Entry] to the right of the user name field to display the soft key-
board.
I Enter the password according to the setting at the destination.
Press [Manual Entry] next to the password field to make the soft keyboard ap-
pear.