Printer/Scanner Product Manual
Table Of Contents
- Printer/Scanner Unit Type 8000 Operating Instructions
- Manuals for This Machine
- TABLE OF CONTENTS
- How to Read This Manual
- About the Scanner Functions
- Display Panel
- Scanner Features
- 1. Sending Scan Files by E-mail
- Before Sending Scan Files by E-mail
- Basic Operation for Sending Scan Files by E-mail
- Switching to the E-mail Screen
- Specifying E-mail Destinations
- Specifying the E-mail Sender
- Specifying the E-mail Subject
- Specifying the E-mail Message
- Simultaneous Storage and Sending by E-mail
- 2. Sending Scan Files to Folders
- Before Sending Files by Scan to Folder
- Basic Operations When Using Scan to Folder
- Switching to the Scan to Folder Screen
- Specifying Scan to Folder Destinations
- Simultaneous Storage and Sending by Scan to Folder
- 3. Storing Files Using the Scanner Function
- 4. Delivering Scan Files
- 5. Scanning Originals with the Network TWAIN Scanner
- 6. Various Scan Settings
- 7. Appendix
- INDEX
Programs
139
6
Programs
You can register frequently used settings in the machine memory and recall
them for future use.
Note
❒ You can register up to 10 programs for the scanner mode.
❒ Programs are not deleted by turning the power off or by pressing the {Clear
Modes} key unless the content is deleted or newly registered.
❒ The following settings can be registered to programs: Scan Settings, 1 Sided/2
Sided Original, Top to Top/Top to Bottom, skip scanning back side of the last
page, Divide, Original Orientation, File Type, Batch/SADF, Store File, Pre-
view, and Reception Notice.
❒ Setting made on the simplified display cannot be registered to a program.
Registering Frequently Used Setting
To register frequently used settings in a program:
A On the initial scanner screen, make the settings you want to register in a
program.
B Press the {Program} key.
C Press [Program].
AMG004S