Printer/Scanner Product Manual
Table Of Contents
- Printer/Scanner Unit Type 8000 Operating Instructions
- Manuals for This Machine
- TABLE OF CONTENTS
- How to Read This Manual
- About the Scanner Functions
- Display Panel
- Scanner Features
- 1. Sending Scan Files by E-mail
- Before Sending Scan Files by E-mail
- Basic Operation for Sending Scan Files by E-mail
- Switching to the E-mail Screen
- Specifying E-mail Destinations
- Specifying the E-mail Sender
- Specifying the E-mail Subject
- Specifying the E-mail Message
- Simultaneous Storage and Sending by E-mail
- 2. Sending Scan Files to Folders
- Before Sending Files by Scan to Folder
- Basic Operations When Using Scan to Folder
- Switching to the Scan to Folder Screen
- Specifying Scan to Folder Destinations
- Simultaneous Storage and Sending by Scan to Folder
- 3. Storing Files Using the Scanner Function
- 4. Delivering Scan Files
- 5. Scanning Originals with the Network TWAIN Scanner
- 6. Various Scan Settings
- 7. Appendix
- INDEX
Before Using the Network TWAIN Scanner
105
5
Preparing to Use the Network TWAIN Scanner
This section describes the preparations and settings for using the machine as a
network TWAIN scanner.
Important
❒ To use the network TWAIN scanner, an application that supports the scan-
ner, such as DeskTopBinder Lite, must be installed on the computer. Desk-
TopBinder Lite is on the supplied CD-ROM. For details about installing
DeskTopBinder Lite, see “Installing DeskTopBinder Lite from the Supplied
CD-ROM”.
A Connect the machine to the network.
Connect the machine to the network using an Ethernet cable or Wireless LAN
(IEEE 802.11b).
B Make the necessary network settings in [System Settings].
If you have connected the machine to the network using an Ethernet cable,
make the following settings. For details, see General Settings Guide.
• Specify the machine’s IPv4 address and subnet mask
•In [Effective Protocol], enable [IPv4]
C Install the TWAIN driver on a client computer.
For details about installing the TWAIN driver, see “Installing the TWAIN
Driver from the Supplied CD-ROM”.
Note
❒ To connect the machine to network using a wireless LAN (IEEE 802.11b),
an extended wireless LAN board is required respectively. For details, see
Network Guide.
❒ For details about [System Settings], see General Settings Guide.
❒ Items to set up in [System Settings] vary depending on the network environ-
ment. For details about the network settings, see General Settings Guide.
Reference
p.106 “Installing the TWAIN Driver from the Supplied CD-ROM”
p.87 “Installing DeskTopBinder Lite from the Supplied CD-ROM”