Cov lus qhia

Changes to V5.8.5 from V5.8.4
[13. February 2020] Digital Camera Utility 5 (Version 5.8.5) Macintosh Updater
[Improve from previous Versions]
• Added new lens name for
[HD PENTAX- DFA70-210mmF4ED SDM WR]
• Corrected --- Even if you press the same magnification display button on the toolbar with the
display magnification changed in the combo box, it does not display the same magnification.
• Corrected --- Spotting results is not reflected when performing spotting on a RAW image and
directly specifying “Apply parameter changes” and performing photo printing without
developing.
• Corrected --- Trimming frame setting may not be saved correctly.
Changes to V5.8.4 from V5.8.3
[19. December 2019] Digital Camera Utility 5 (Version 5.8.4) Macintosh Updater
[Improve from previous Versions]
• Corrected --- When opening image file that is changed the parameter of noise reduction panel
after restarting Digital Camera Utility 5, each noise reduction parameter changes are not
restored.
• Corrected --- When trying to switch to Browser mode with adjusting (Change parameter)
JPEG image and without saving re-develop saving in Laboratory mode, adjusted parameters
are not reflected to saved image even save the image file with selecting [YES] on save warning
dialog.
• Corrected --- When trying to switch to Browser mode with all image display pages close in
Laboratory mode, the error message [Encountered an improper argument] is displayed and
freeze the software.
Changes to V5.8.3 from V5.8.2
[18. April 2019] Digital Camera Utility 5 (Version 5.8.3) Macintosh Updater
[Improve from previous Versions]
• Corrected --- The parameter information is not correctly described in image file that is selected
[Cross Processing] for image finishing of Custom image and saved [Develop and Save].
• Corrected --- When displaying RAW data shooting under the condition that lens aberration
correction is disabled, the image with vertical line is displayed under the condition that the
simple RAW development image is displayed.