Cov lus qhia

[Corrections from previous Versions]
• Corrected – When "Any" is selected for the aspect setting of the trimming frame, the default
value of 1:1 is not correctly set for the default trimming frame.
• Corrected –Fixed the problem that the aspect ratio shifts when dragging the extension handle
of the selection frame when the aspect ratio is set to "Any" in trimming the vertical image.
• Corrected –Fixed the problem where the vertical/horizontal position of the paper designation
combo box and the vertical/horizontal position of the trimming frame are opposite in the "Fixed"
trimming mode.
• Corrected –Fixed a problem in which the image could not be saved when trying to extract
RAW with fringe correction turned on.
• Corrected –The thumbnails displayed on the transfer folder selection screen for easy image
importing are not linked to the selected folder.
• Corrected –When moving the selection frame on the file list with the left and right cursor keys,
the next step will not be available at the movie section.
• Corrected –The problem where the default image finish is set to "Natural" and the image
quality does not return to the expected level even if "Reversal Film" is selected again when
redeveloping JPEG images saved from RAW images taken with models such as the *ist DL
with the image finish set to "Reversal Film" in DCU5.
• Corrected –A problem in which the image would turn magenta when redeveloping a JPEG
image shot with the image finish "MUTED" on models such as the K-5II.
Changes to V5.9.2 from V5.9.1
[Corrections from previous Versions]
• Corrected – The problem that caused some of the menus by Laboratory mode to be written in
Japanese when used in a non-Japanese OS environment.
*When this update is done, the contents of version 5.8.6 and earlier will be also updated.
Changes to V5.8.6 from V5.8.5
[12. March 2020] Digital Camera Utility 5 (Version 5.8.6) Macintosh Updater
[Improve from previous Versions]
• Corrected --- In Custom Image of [Bleach Bypass], [Muted] and [Monochrome], [Color tone]
changes are not reflected in the image preview.
• Corrected --- When opening a RAW image file that is 1:1 crop shooting with K-1 or
K-1 Mark II in Laboratory mode, the cropping range is not reproduced correctly.
• Corrected--- When opening a RAW image file that is shooting with Pixel Shift Resolution
System in Laboratory mode and continuously changing any parameter with the slider, preview
image is not updated.