Cov lus qhia

• Corrected – The development result become brighter by about 1 EV when the shadow
correction is ON with RAW image of K-01/K-30/K-50.
• Corrected – It becomes a subfolder of the copy destination when the name of the destination
folder suffered by simple image transfer.
• Corrected – The file name change at the time of detailed file list display was illegal.
• Corrected – The windows no longer responds when transferring a large number of images
with simple image capture.
• Corrected – The space between the edge of the screen and end of screen greatly differs
between when the top and bottom edges of the image are aligned vertically for character input.
• Corrected – A frame indicating the focus is attached to multiple buttons in the save dialog.
• Corrected – The preview image was specified when transition to Laboratory mode, the display
direction of the image was not reflected on the button of the tool bar.
• Corrected – The redevelopment of JPEG file shooting with PENTAX Q series cannot be done
correctly.
• Corrected – The parameter change is not reflected when finishing is set to reversal film by
JPEG redevelopment.
• Corrected – A black band appears in the vertical position image when finishing is set to
reversal film by JPEG redevelopment.
• Corrected – The image becomes grainy image when redevelopment of JPEG image taken by
the monotone setting of PENTAX K-3.
• Corrected – It cannot be expanded normally if the parameter file of the past version (Such as
version 5.3.1) is applied.
Changes to V5.6.2
[07. September 2016] Digital Camera Utility 5 (Version 5.6.2) Macintosh Updater
[Corrections from previous Versions]
• Corrected - RAW image of K-7 and other previous products cannot develop (include photo
print and preview of Laboratory mode) on version 5.6.1.
• Corrected - When pressing area expanding button on cropping of Laboratory mode, cropping
coordinate is out of position.