Service manual
Copyright
2003 RICOH Corporation. All rights reserved.
TECHNICAL SERVICE BULLETIN
BULLETIN NUMBER: B358 – 003 02/12/2003
APPLICABLE MODEL:
GESTETNER - PRINTER CONTROLLER for 3225e/3245e
RICOH - PRINTER CONTROLLER for AFICIO 350e/450e
SAVIN -PRINTER CONTROLLER for 9935DPE/9945DPE
SUBJECT: FIRMWARE MODIFICATION
GENERAL:
The latest firmware version can be downloaded at the Technology Solution Center FTP Site
http://tsc.ricohcorp.com.
Be sure to check the README file for important notes and explanations.
NOTE: Refer to Facts Line Bulletin # FL002 and Publication Bulletin #023 for more information about the
FTP Internet Web Site and EPROM/Flash Card Exchange program.
B358 PRINTER CONTROLLER FIRMWARE MODIFICATION
DESCRIPTION OF MODIFICATION
FIRMWARE
LEVEL
SERIAL
NUMBER
FIRMWARE
VERSION
Corrects the following:
After NIB reset has been performed, “NIB
Initializing ….” is sometimes displayed, and
the machine does not enter stand-by mode
When using the Smart Net Monitor,
sometimes nothing is printed out.
When printing two pages from a UNIX system,
a blank page may be inserted in between.
B3586080 F
Feb. ‘02
Prod.
2.02
Note: This copy is intended as a master original
for reproduction of additional bulletins.
FIRMWARE