Service manual

ERROR MESSAGES
B358 6-2 SM
Other Messages
The following errors might need assistance from service.
Error Message Condition Possible Cause
Printer HDD Error.
Press Reset to cancel
current job.
A hard disk error was
detected during downloading
the macro or fonts.
• Printer HDD defective
• Printer controller
defective
Parallel Communication
Error.
Please set up
communication
parameters in parallel
menu. Press Reset to
cancel current job.
Parallel communication error
occurred during a print job
via the parallel port.
• An item in the parallel
menu was set
incorrectly
• Parallel cable defective
• Printer controller
defective
Print overrun.
Press Reset to cancel
current job, or press
Continue to print.
This error occurred when a
file was being printed in
banding mode. A complex
page may not have enough
time to image a band while
the engine is printing the
previous page.
• Insufficient memory
• A complex page is
printed
• The DRAM SIMM board
is defective
• The controller is
defective
Memory overflow.
Press Reset to cancel
current job.
This error occurred during
printing.
The language has sent a file
that is too complex to
interpret in the available
memory.
• Insufficient memory
• A complex page is
printed
• The DRAM SIMM is
board defective
• The controller is
defective