Service manual

ERROR MESSAGES
SM 6-1 B358
Trouble-
shooting
6. TROUBLESHOOTING
6.1 ERROR MESSAGES
If an error occurred, the error LED lights (red light with the printer key) and an error
message is displayed on the LCD.
Service Call (SC) Codes
SC No. Description / Definition Possible Cause
Functional problems (Self diagnostic error)
SC2000
A diagnostic error occurred at power on. The
controller has a hardware problem.
Printer controller board
defective.
Functional problems (Debug trap error)
SC2001
An error has occurred in the controller. The
controller has a software problem.
The controller software
has a problem.
Functional problems (Exception error)
SC2002
An error has occurred in the controller. The
controller has a software or hardware problem.
Printer controller board
defective.
Printer
Copy
B358T501.WMF