Service manual

HARD DISK
B358 5-2 SM
5.2 HARD DISK
1. Slide out the printer controller (see Printer Controller).
2. Dismount the hard disk [A] with bracket and IDE cable from the printer
controller (4 screws).
3. Remove two brackets [B] (2 screws each).
4. Disconnect the IDE cable [C].
5.3 NETWORK INTERFACE BOARD
1. Slide out the printer controller (see Printer Controller).
2. Disconnect the cable [A] from the printer controller and network interface board.
3. Remove the network interface board [B] (4 screws).
B358R504.WMF
B358R503.WMF
[A]
[C]
[A]
[B]
[B]