Service manual

CHECKING THE CONNECTIONS
B358 3-14 SM
3.7.2 CONNECTION BETWEEN MAIN CONTROLLER BOARD AND
THE NETWORK INTERFACE BOARD
There are two ways to check the connection between the main controller board
and the network interface board.
1. Check “Network Menu” on the configuration page.
2. Check the Network Interface Board Status Sheet with the network information
that is printed automatically after power on.
Printing the Network Interface Board Status Sheet
Whenever the main switch is turned on, the machine prints the network interface
board status sheet automatically.
NOTE:
If the machine does not print the status sheet, check the Network menu in
the printer user tools.
If any problem occurs with the above check, reinstall the printer controller and other
options. Then set up the machine again and redo the test.