Service manual

PRINTER CONTROLLER
SM 3-7 B358
Installation
29. Make sure that the parallel cable is not connected to the controller. Turn the
machine on and check the setting of the following copier SP mode:
•
SP5-907: Plug & Play Brand Name and Production Name Setting – select the
correct one.
30. If the customer wishes to expand the hard disk space in the mainframe for use
by the printer, change the setting of “Memory Priority” (User Tool – 1. System –
No.23) to “Printer”.
31. Print the Printer Configuration Page (User Tool – 4. Printer – 7. List Print – 5.
Configuration Page) to check the printer controller connection.
32. If the parallel cable is going to be connected, first turn off the machine. After
connecting the cable, turn the machine back on.