Service manual

PRINTER CONTROLLER
SM 3-3 B358
Installation
Printer Controller Installation
NOTE:
1) The optional HDD (A853), PS Kit (A854) or Network Interface Board
(A855) must be installed before installing the printer controller in the
machine. Refer to each installation manual for more detail.
2) If either the Scanner Option Type 450e or Fax Option Type 450e has
been installed, perform step 9. If neither have been installed, skip step 9.
9. Remove the two plates (2 screws) [A] and [B] (4 screws).
10. After installing the additional options on the printer controller, install the
controller [C] in the left-most slot of the expansion box [D] (2 screws).
11. Reattach plate [B].
[B]
[C]
[D]
[A]