Service manual

PRINTER CONTROLLER
B358 3-2 SM
3.1.3 INSTALLATION PROCEDURE
!
CAUTION
Unplug the main machine power cord before starting the following procedure.
Expansion Box Installation
NOTE:
If either the Scanner Option Type 450e or Fax Option Type 450e has been
installed, skip steps 1 through 8.
1. Remove the connector cover [A], rear cover [B] (4 screws), and left cover [C] (4
screws).
2. Remove the cutout [D] in the left cover.
3. Remove the HDD [E] (4 screws, 2 connectors).
4. Remove the bracket [F] (1 screw).
5. Remove the two plates [G] (2 screws) and [H] (4 screws).
6. Connect the cable [I] to the expansion box [J] and install the expansion box (4
screws).
7. Reinstall the HDD.
8. Reinstall the left, rear, and connector covers.
B358I502.WMF
B358I503.WMF
B358I500.WMF
B358I507.WMF
[A]
[B]
[C]
[D]
[J]
[G]
[H]
[I]
[E]
[F]