Service manual

HARD DISK
B358 2-8 SM
2.5 HARD DISK
Two hard disks are used for the printer functions. One is connected to the printer
controller (Printer HDD). The other is in the main machine (Engine HDD).
2.5.1 PRINTER HDD
When the main power switch is turned on after the printer HDD is installed, the
machine asks you to format the hard disk.
If you press the “Yes” button, the machine formats the hard disk. At this time, two
partitions will be made on the hard disk. One is for PCL and the other is for
PostScript (fonts and macros only).
If you press the “Ignore” button, the machine determines that there is no optional
printer hard disk.
2.5.2 ENGINE HDD
The hard disk in the main machine is used for both copy and printer functions.
Therefore, the hard disk has three partitions: for copier, printer, and archive files
(one of the copier features
). The sizes of the partitions depend on the setting of
“User Tools – 1. System – No.23, Memory Priority”, as shown below.
Copier
1200MB
Printer
132MB
Archive Files
308MB
Copier
720MB
Printer
612MB
Archive Files
308MB
Priority:
0 MB
1640 MB
Copy
(Default)
Printer
B358D505.WMF