Owner`s manual

NetWare
®
Configuration
12
2
NetWare 4.x Configuration
Login as Supervisor and start PCONSOLE.
Note
❒
Be sure to turn the printer off and after changing the network configuration.
Define Print Queue
A From the Available Options Menu, select Print Queues and press the
{
{{
{
EN-
TER
}
}}
}
key.
The Print Queues screen appears.
B Press the
{
{{
{
INSERT
}
}}
}
key.
C Input the name of the new Print Queue and press the
{
{{
{
ENTER
}
}}
}
key.
D Input the volume name where the print queue will reside and press the
{
{{
{
ENTER
}
}}
}
key.
If you want to browse for a volume, press the
{
INSERT
}
key.
E A list of volumes appears. Select the volume you want to use and press the
{
{{
{
ENTER
}
}}
}
key.
You are returned to the Print Queues screen, and the new queue is visible.
F Press the
{
{{
{
ESC
}
}}
}
key to return to the Available Options screen.
Define the Print Server
A From the Available Options screen, select Print Servers and press the
{
{{
{
EN-
TER
}
}}
}
key.
The Printer Servers screen appears.
B Press the
{
{{
{
INSERT
}
}}
}
key.
C Input the NIB print server name and press the
{
{{
{
ENTER
}
}}
}
key.
Note
❒
The default Printer Server name is RDP_ followed by the six-digit serial
number of the NIB, e.g. RDP_123456.
❒
The serial number is listed on the bottom of the NIB and is displayed on
the NIB box.
❒
If the NIB has already been installed, the Novell Print Server Name can be
found on the power-up network status page under Novell Network Infor-
mation.