Owner`s manual

Chapter 8 - 2
complete.
Green LED
blinks rapidly
Awaiting print
jobs.
Has lost its
NetWare
connection to
file server.
Error. Check
the cable
connection and
restart the
printer.
8.2 Status Report
The Status/Configuration report is sent as a print job to the printer when the print server
is powered on. For example, the report on the next page shows the configuration of the
print server immediately after the report is printed. Some printers also allow you to use a
command from the front panel that will produce a status report.
It is strongly recommended that you review this report immediately after installation and
any time the setup has been changed. If the report does not include a protocol that was
configured, check that the procedure was done properly.