Owner`s manual

Chapter 4 - 21
Delay in minutes for repeat messages: Indicates how long
the Network Interface Board should wait before sending a
repeat notification of an error condition. This field is set to 30
minutes by default. Its minimum value is 1 minute and
maximum value is 60 minutes.
4.6.3.4 Configuring the Notify Settings
The Notify Settings screen appears when you double-click on an entry in the Users/
Groups Notified by Printer field on the Print Server screen. Use this screen to set up the
notify function for the users or groups.
The following screen appears for setting up Notify. A description of each field follows the
screen example.
Below is a description of each field:
Field Description
User/Group name Indicates the name of the user or group which is
being edited. This field cannot be changed.
Delay in minutes for
first message
Indicates how long the Network Interface Board
should wait before sending a notification message to
the user that an error condition has occurred.
The field is set to 5 minutes by default but can be set
to any value between 1 to 60 minutes.
Delay in minutes for
repeat messages
Indicates how long the Network Interface Board should
wait before sending a repeat notification message to a
user or group when an error condition has occurred.
The field is set to 30 minutes by default but can be set
to any value between 1 to 60 minutes.