Owner`s manual

Chapter 4 - 15
Field Description
Enable NetWare
Print Server
Indicates whether the NetWare Network Interface Board has
been enabled.
If the box is not checked, the Network Interface Board has not been
enabled for NetWare. All other fields on the screen will be shaded.
If the box is checked, the Network Interface Board has been
enabled for NetWare and you can make entries in the other fields.
Print Server Name
Indicates the NetWare print server name which the Network
Interface Board uses to log into NetWare. You can enter a
name which does not already exist in the network directory or
server bindery. The maximum field length is 48 characters.
Print Queue Scan Rate
Specifies the rate at which a Network Interface board
will poll print queues for a new print job.
For example, if you place 1 in the field, the Network
Interface Board should poll for new print jobs every 1
second.
The minimum value for this field is 1 and the
maximum is 250.
Print Server Password
and Print Server
Password Retype
Indicates the password for a Network Interface Board which
will be used to log into NetWare. When you change this field,
NWSetup will set the password in both NetWare and the
Network Interface Board.
The maximum length for this field is 32 characters. Both the
Password and Password Retype fields must be identical
before a user is allowed to Finish this screen.
Ethernet Frame Type
Indicates the Ethernet frame type that should be used by the
NetWare protocol stack by default. Only one frame type can
be selected.
Below is an example of the second Print Server Settings screen.