Owner's Manual Network Guide
Table Of Contents
- Network Guide
- TABLE OF CONTENTS
- Manuals for This Machine
- How to Read This Manual
- 1. Getting Started
- 2. Connecting and Setting Up
- 3. Using a Printer Server
- 4. Monitoring and Configuring the Printer
- Using Web Image Monitor
- Using SmartDeviceMonitor for Admin
- Installing SmartDeviceMonitor for Admin
- Changing the Network Interface Board Configuration
- Locking the Menus on the Machine's Control Panel
- Changing the Paper Type
- Managing User Information
- Configuring the Energy Saver Mode
- Setting a Password
- Checking the Machine Status
- Changing Names and Comments
- Load Fax Journal
- Viewing and Deleting Spool Print Jobs
- Managing Address Information
- Using SmartDeviceMonitor for Client
- Remote Maintenance by telnet
- SNMP
- Getting Printer Information over the Network
- Understanding the Displayed Information
- Message List
- 5. Special Operations under Windows
- 6. Appendix
- INDEX
Using SmartDeviceMonitor for Client
87
4
When Using IPP with
SmartDeviceMonitor for Client
When using IPP with SmartDevice-
Monitor for Client, note the following:
• The network printer can only re-
ceive one print job from SmartDe-
viceMonitor for Client at a time.
While the network printer is print-
ing, another user cannot access it
until the job is finished. In this
case, SmartDeviceMonitor for Cli-
ent tries to access the network
printer until the retry interval ex-
pires.
• If SmartDeviceMonitor for Client
cannot access the network printer
and times out, it will stop sending
the print job. In this case, you
should cancel the paused status
from the print queue window.
SmartDeviceMonitor for Client
will resume access to the network
printer. You can delete the print
job from the print queue window,
but canceling a print job printed by
the network printer might cause
the next job sent from another user
to be incorrectly printed.
• If a print job sent from SmartDe-
viceMonitor for Client is interrupt-
ed and the network printer cancels
the job because something went
wrong, send the print job again.
• Print jobs sent from another com-
puter do not appear in the print
queue window, regardless of pro-
tocol.
• If various users send print jobs us-
ing SmartDeviceMonitor for Client
to network printers, the printing
order might not be the same as that
in which the jobs were sent.
• An IP address cannot be used for
the IPP port name because the IP
address is used for the SmartDe-
viceMonitor for Client port name.
• When setting SSL, a protocol for
encrypted communication, under
environment which server authen-
tification is issued, enter "ht-
tps://(machine's address)/".
Internet Explorer must be installed
on your computer. Use the highest
version. Internet Explorer 6.0 or
higher is recommended.
• If the [Security Alert] dialog box ap-
pears when accessing the machine
using IPP to create or configure an
IPP port, or when printing, install
the certificate. To select the certifi-
cate store location when using Cer-
tificate Import Wizard, click [Place
all certificates in the following store],
and then click [Local Computer] un-
der [Trusted Root Certification Author-
ities].
Note
❒ For details about SSL settings,
consult your network adminis-
trator.