Owner's Manual Network Guide
Table Of Contents
- Network Guide
- TABLE OF CONTENTS
- Manuals for This Machine
- How to Read This Manual
- 1. Getting Started
- 2. Connecting and Setting Up
- 3. Using a Printer Server
- 4. Monitoring and Configuring the Printer
- Using Web Image Monitor
- Using SmartDeviceMonitor for Admin
- Installing SmartDeviceMonitor for Admin
- Changing the Network Interface Board Configuration
- Locking the Menus on the Machine's Control Panel
- Changing the Paper Type
- Managing User Information
- Configuring the Energy Saver Mode
- Setting a Password
- Checking the Machine Status
- Changing Names and Comments
- Load Fax Journal
- Viewing and Deleting Spool Print Jobs
- Managing Address Information
- Using SmartDeviceMonitor for Client
- Remote Maintenance by telnet
- SNMP
- Getting Printer Information over the Network
- Understanding the Displayed Information
- Message List
- 5. Special Operations under Windows
- 6. Appendix
- INDEX

Connecting and Setting Up
46
2
❖ E-mail Reception Interval
Specify, in minutes, the time limit
for receiving Internet faxes via
POP3 or IMAP4 server.
• On: 15 minute(s)
• Off
Note
❒ Default: On/15 minute(s)
❒ If [On] is selected, the number of
times can be set from 1 to 1440
in increments of one minute, us-
ing the number keys.
❖
❖❖
❖ Max. Reception E-mail Size
Specify the [Max. Reception E-mail
Size] for receiving Internet faxes.
Note
❒ Default: 2MB
❒ Using the number keys, enter a
size from one to 50 MB in incre-
ments of one megabyte.
❖
❖❖
❖ E-mail Storage in Server
You can specify whether or not to
store received Internet fax e-mails
on the POP3 or IMAP4 server.
• Off
• All
• Errors Only
Note
❒ Default: Off
❖
❖❖
❖ Default User Name / Password (Send)
You can specify the user name and
password required when sending
scan file directly to a shared folder
on a computer running Windows,
or to an FTP server.
• SMB User Name
• SMB Password
• FTP User Name
• FTP Password
Limitation
❒ Enter up to 128 alphanumeric
characters.
❖ Program / Change / Delete E-mail Mes-
sage
You can program, change, or de-
lete the e-mail message used when
sending an Internet fax or scan file
as an attachment.
• Program / Change
• Delete
Note
❒ Enter a name using up to 20 al-
phanumeric characters.
❒ Enter up to five lines of text.
Each line can consist of up to 80
alphanumeric characters.
❖ Program / Change / Delete Subject
You can program, change, or de-
lete the subject used when sending
an Internet fax or scan file as an at-
tachment.
• Program / Change
• Delete
Note
❒ Enter a subject using up to 20 al-
phanumeric characters.
❖ Scanner Recall Interval Time
Specifies the interval the machine
waits before resending scan file, if
they cannot be sent to the delivery
server or mail server.
Note
❒ Default: 300 seconds
❒ The interval time can be set
from 60 to 999 seconds in one
second increments, using the
number keys.
❒ This setting is for the scanner
function.
❖ Number of Scanner Recalls
Sets a maximum number of times
scan file is resent to the delivery
server or mail server.
• On: 3 time(s)










