Owner's Manual Network Guide
Table Of Contents
- Network Guide
- TABLE OF CONTENTS
- Manuals for This Machine
- How to Read This Manual
- 1. Getting Started
- 2. Connecting and Setting Up
- 3. Using a Printer Server
- 4. Monitoring and Configuring the Printer
- Using Web Image Monitor
- Using SmartDeviceMonitor for Admin
- Installing SmartDeviceMonitor for Admin
- Changing the Network Interface Board Configuration
- Locking the Menus on the Machine's Control Panel
- Changing the Paper Type
- Managing User Information
- Configuring the Energy Saver Mode
- Setting a Password
- Checking the Machine Status
- Changing Names and Comments
- Load Fax Journal
- Viewing and Deleting Spool Print Jobs
- Managing Address Information
- Using SmartDeviceMonitor for Client
- Remote Maintenance by telnet
- SNMP
- Getting Printer Information over the Network
- Understanding the Displayed Information
- Message List
- 5. Special Operations under Windows
- 6. Appendix
- INDEX
Monitoring and Configuring the Printer
132
4
Note
❒ For details about UNIX commands and parameters, see UNIX Supplement.
❒ For details about “syslog” command, see p.106 “syslog”.
snmpd start. The snmpd service has started.
started. The direct print service has started.
Started. The rendezvous function is enabled.
Terminated. The rendezvous function is disabled.
Terminated. (PS not found) The rendezvous function is disabled because
PS is not found.
The print server received error <error
number> during attempt to log in to the net-
work. Access to the network was denied. Ver-
ify that the print server name and password
are correct.
Login to the file server failed. The print server
is not registered or a password is specified.
Register the print server without specifying a
password.
WINS name refresh :Server No Response There was no response to the update request
from the print server. Check that the WINS
server address is correct and the WINS server
is working properly.
WINS name registration/refresh error
code(errornumber)
Set unique NetBIOS names.
Check that the WINS server address is correct
and the WINS server is working properly.
WINS name registration:Server No Response There was no response to the registration re-
quest from the server. Check that the WINS
server address is correct and the WINS server
is working properly.
WINS server address0.0.0.0 The WINS server was not specified. Specify
the WINS server address to match the printer
name with WINS.
WINS Server=<WINS server address> NetBI-
OS Name=<NetBIOS name>
The printer name was successfully registered.
WINS wrong scopeID The scope ID is incorrect.
Specify the correct scope ID.
Message Problem and solutions