Owner's Manual Network Guide
Table Of Contents
- Network Guide
- TABLE OF CONTENTS
- Manuals for This Machine
- How to Read This Manual
- 1. Getting Started
- 2. Connecting and Setting Up
- 3. Using a Printer Server
- 4. Monitoring and Configuring the Printer
- Using Web Image Monitor
- Using SmartDeviceMonitor for Admin
- Installing SmartDeviceMonitor for Admin
- Changing the Network Interface Board Configuration
- Locking the Menus on the Machine's Control Panel
- Changing the Paper Type
- Managing User Information
- Configuring the Energy Saver Mode
- Setting a Password
- Checking the Machine Status
- Changing Names and Comments
- Load Fax Journal
- Viewing and Deleting Spool Print Jobs
- Managing Address Information
- Using SmartDeviceMonitor for Client
- Remote Maintenance by telnet
- SNMP
- Getting Printer Information over the Network
- Understanding the Displayed Information
- Message List
- 5. Special Operations under Windows
- 6. Appendix
- INDEX
Monitoring and Configuring the Printer
130
4
pserver start. (NetWare) (In the print server mode) The NetWare serv-
ice has started.
Required computer name (<Computer
name>) is duplicated name
The start job found the computer name by
adding the computer name to the suffix (0,1...).
Set a new computer name that is unique.
Required file server (<file server name>) not
found
The required file server is not found.
restarted. The lpd service has started.
sap enable, saptype=<SAP type>, sap-
name=<SAP name>
The SAP function has started. The SAP packet
is issued to advertise the service on the SAP ta-
ble on the NetWare server.
session <community name> already defined. The requested community name is not de-
fined.
session_ipx <community name> not defined. The requested community name is not de-
fined.
Set context to <NDS context name> An NDS context name has been set.
shutdown signal received. network service re-
booting...
The network service is rebooting.
smbd start. (NetBEUI) The smbd service has started.
SMTPC: failed to get smtp server ip-address. The SMTP server IP address could not be ob-
tained. This could be because:
• The specified DNS server could not be
found.
• No connection to the network has been es-
tablished.
• The specified DNS server could not be
found.
• An incorrect DNS server is specified.
• The specified SMTP server IP address
could not be found in the DNS server.
SMTPC: failed to connect smtp server. time-
out.
Connection to the SMTP server failed due to
timeout. This could be because:
• The specified SMTP server name is incor-
rect.
• No connection to the network has been es-
tablished.
• The network configuration is incorrect, so
there is no response from the SMTP server.
SMTPC: refused connect by smtp server. Connection to the SMTP server is denied. This
could be because:
• A server other than the SMTP server has
been specified.
• The specified SMTP server port number is
incorrect.
Message Problem and solutions