Owner's Manual Network Guide
Table Of Contents
- Network Guide
- TABLE OF CONTENTS
- Manuals for This Machine
- How to Read This Manual
- 1. Getting Started
- 2. Connecting and Setting Up
- 3. Using a Printer Server
- 4. Monitoring and Configuring the Printer
- Using Web Image Monitor
- Using SmartDeviceMonitor for Admin
- Installing SmartDeviceMonitor for Admin
- Changing the Network Interface Board Configuration
- Locking the Menus on the Machine's Control Panel
- Changing the Paper Type
- Managing User Information
- Configuring the Energy Saver Mode
- Setting a Password
- Checking the Machine Status
- Changing Names and Comments
- Load Fax Journal
- Viewing and Deleting Spool Print Jobs
- Managing Address Information
- Using SmartDeviceMonitor for Client
- Remote Maintenance by telnet
- SNMP
- Getting Printer Information over the Network
- Understanding the Displayed Information
- Message List
- 5. Special Operations under Windows
- 6. Appendix
- INDEX
Getting Printer Information over the Network
119
4
Printer configuration
You can check the printer configuration using telnet.
This section explains the checking procedure for input/output tray and printer
language.
• UNIX: Use the "info" command and "rsh", "rcp", and "ftp" parameters.
• mshell: Use the "info" command.
❖ Input Tray
❖ Output Tray
❖ Emulation
Note
❒ For details about UNIX commands and parameters, see UNIX Supplement.
❒ For details about mshell info commands, see p.96 “info”.
Item Description
No. ID number of the paper tray
Name Name of the paper tray
PaperSize Size of paper loaded in the paper tray
status Current status of the paper tray
• Normal:Normal
• NoInputTray: No tray
• PaperEnd:No paper
Item Description
No. ID number of the output tray
Name Name of the output tray
status Current status of the output tray
• Normal:Normal
• PaperExist:Paper exist
• OverFlow:Paper is full
• Error:Other errors
Item Description
No. ID number of the printer language used by the
printer
Name Name of the printer language used in the
printer
Version Version of the printer language