Specifications

10
JustLink works on the following principle:
1. The amount data accumulated in the buffer
memory is always monitored during writing.
2. If, for some reason, the data transfer speed from
the computer falls below the writing speed, the
amount of data accumulated in the buffer memory
falls.
3. When the amount of data in the buffer memory
falls below a certain level, and the possibility of a
buffer under run error is predicted if writing
continues, writing is intentionally suspended for
the time being.
4. During the time that writing is suspended, data
transferred from the computer accumulates in the
buffer memory.
5. When enough data has accumulated, writing is
resumed from the point directly after the point
where it was suspended, and monitoring of the
amount of data in the buffer memory is
recommenced.