Operating instructions
Table Of Contents
- General Settings Guide
- Introduction
- Important
- Notes:
- Manuals for This Machine
- TABLE OF CONTENTS
- How to Read This Manual
- Display Panel
- Accessing User Tools
- 1. Connecting the Machine
- Connecting to the Interfaces
- Network Settings
- Settings Required to Use the Printer/LAN-Fax
- Settings Required to Use Internet Fax
- Settings Required to Use E-mail Function
- Settings Required to Use Scan to Folder Function
- Settings Required to Use the Network Delivery Scanner
- Settings Required to Use Network TWAIN Scanner
- Settings Required to Use Document Server
- Using Utilities to Make Network Settings
- Connecting the Machine to a Telephone Line and Telephone
- 2. System Settings
- 3. Copier / Document Server Features
- 4. Facsimile Features
- General Features
- Scan Settings
- Send Settings
- Reception Settings
- Initial Settings
- Reception File Setting
- Program / Change / Delete Scan Size
- Registering Fax Information
- Forwarding
- Parameter Settings
- Special Senders to Treat Differently
- Authorized Reception
- Reception File Print Quantity
- Forwarding
- Print 2 Sided
- Memory Lock
- Paper Tray
- Programming/Changing Special Senders
- Authorized RX (Authorized Reception)
- Reception File Print Qty
- Forwarding
- Print 2 Sided
- Memory Lock
- Paper Tray per Sender
- Programming Initial Set Up of a Special Sender
- Deleting a Special Sender
- Box Settings
- 5. Printer Features
- 6. Scanner Features
- 7. Registering Addresses and Users for Facsimile/Scanner Functions
- Address Book
- Registering Names
- Authentication Information
- Fax Destination
- Fax Destination
- IP-Fax Destination
- Registering an IP-Fax Destination
- Changing a Registered IP-Fax Destination
- Using the IP–Fax Destination as the sender
- To change the IP-Fax Destination
- To select the protocol
- To program the SUB Code
- To program the SEP Code
- To set the International TX Mode
- To select the fax header
- Deleting a Registered IP-Fax Destination
- E-mail Destination
- Registering Folders
- Registering Names to a Group
- Registering a Protection Code
- Registering SMTP and LDAP Authentication
- 8. Other User Tools
- 9. Appendix
- INDEX
Tray Paper Settings
53
2
❖ Printer Bypass Paper Size
Specify the size of the paper in the bypass tray when printing data from the computer.
❖ The paper sizes you can set for bypass tray are as follows:
•Metric version
"Auto Detect", "A3L", "A4K", "A4L", "A5K", "A5L", "A6L", "B4JISL",
"B5JISK", "B5JISL", "B6JISL", "C5 EnvK", "C6 EnvK", "DL EnvK",
"12×18L", "11×17L", "8
1
/
2
×14L", "8
1
/
2
×13L", "8
1
/
2
×11K", "8
1
/
2
×11L",
"8
1
/
4
×13L", "8×13L", "7
1
/
4
×10
1
/
2
K", "7
1
/
4
×10
1
/
2
L", "5
1
/
2
×8
1
/
2
L",
"4
1
/
8
×9
1
/
2
K", "3
7
/
8
×7
1
/
2
K", "8KL", "16KK", "16KL"
Specify a custom size of between 90.0-305.0mm vertically, and between
148.0-600.0mm horizontally.
•Inch version
"Auto Detect", "12×18L", "11×17L", "8
1
/
2
×14L", "8
1
/
2
×13L",
"8
1
/
2
×11K", "8
1
/
2
×11L", "8
1
/
4
×13L", "8×13L", "7
1
/
4
×10
1
/
2
K",
"7
1
/
4
×10
1
/
2
L", "5
1
/
2
×8
1
/
2
L", "4
1
/
8
×9
1
/
2
K", "3
7
/
8
×7
1
/
2
K", "A3L",
"A4K", "A4L", "A5K", "A5L", "A6L", "B4JISL", "B5JISK", "B5JISL",
"B6JISL", "C5 EnvK", "C6 EnvK", "DL EnvK", "8KL", "16KK", "16KL"
Specify a custom size of between 3.55"-12.00" vertically, and between
5.83"-23.62" horizontally.
❖ Paper Type: Bypass Tray
Sets the display so you can see what type of paper is loaded in the bypass tray.
•Paper Type
• No Display
•Recycled Paper
• Color Paper
• Letterhead
•Label Paper
• OHP (Transparency)
• Special Paper 1
• Special Paper 2
• Special Paper 3
•Cardstock
• Preprinted Paper
•Bond Paper
•Paper Thickness
• Thin Paper
• Plain Paper (60-81g/m
2
, 16-22lb.)
• Middle Thick (82-105g/m
2
, 22-28lb.)
• Thick Paper 1 (106-169g/m
2
, 28.5-44.9lb.)
• Thick Paper 2 (170-219g/m
2
, 45-58lb.)
• Thick Paper 3 (220-253g/m
2
, 58.5-67lb.)