Operating instructions
Table Of Contents
- General Settings Guide
- Introduction
- Important
- Notes:
- Manuals for This Machine
- TABLE OF CONTENTS
- How to Read This Manual
- Display Panel
- Accessing User Tools
- 1. Connecting the Machine
- Connecting to the Interfaces
- Network Settings
- Settings Required to Use the Printer/LAN-Fax
- Settings Required to Use Internet Fax
- Settings Required to Use E-mail Function
- Settings Required to Use Scan to Folder Function
- Settings Required to Use the Network Delivery Scanner
- Settings Required to Use Network TWAIN Scanner
- Settings Required to Use Document Server
- Using Utilities to Make Network Settings
- Connecting the Machine to a Telephone Line and Telephone
- 2. System Settings
- 3. Copier / Document Server Features
- 4. Facsimile Features
- General Features
- Scan Settings
- Send Settings
- Reception Settings
- Initial Settings
- Reception File Setting
- Program / Change / Delete Scan Size
- Registering Fax Information
- Forwarding
- Parameter Settings
- Special Senders to Treat Differently
- Authorized Reception
- Reception File Print Quantity
- Forwarding
- Print 2 Sided
- Memory Lock
- Paper Tray
- Programming/Changing Special Senders
- Authorized RX (Authorized Reception)
- Reception File Print Qty
- Forwarding
- Print 2 Sided
- Memory Lock
- Paper Tray per Sender
- Programming Initial Set Up of a Special Sender
- Deleting a Special Sender
- Box Settings
- 5. Printer Features
- 6. Scanner Features
- 7. Registering Addresses and Users for Facsimile/Scanner Functions
- Address Book
- Registering Names
- Authentication Information
- Fax Destination
- Fax Destination
- IP-Fax Destination
- Registering an IP-Fax Destination
- Changing a Registered IP-Fax Destination
- Using the IP–Fax Destination as the sender
- To change the IP-Fax Destination
- To select the protocol
- To program the SUB Code
- To program the SEP Code
- To set the International TX Mode
- To select the fax header
- Deleting a Registered IP-Fax Destination
- E-mail Destination
- Registering Folders
- Registering Names to a Group
- Registering a Protection Code
- Registering SMTP and LDAP Authentication
- 8. Other User Tools
- 9. Appendix
- INDEX
Appendix
288
9
Finisher Shift Tray:
• Paper size:
A3L, B4JISL, A4KL, B5JISKL, A5KL, B6JISL, A6L, 12"×18"L,
11"×17"L, 8
1
/
2
"×14"L, 8
1
/
2
"×11"KL, 8
1
/
2
"×5
1
/
2
"L
•Paper weight:
52-256g/m
2
, 14–68lb.
• Stack capacity:
No Staple:
• 3,000 sheets: A4K, 8
1
/
2
"×11"K (80g/m
2
, 20lb.)
• 1,500 sheets: A3L, B4JISL, A4L, B5JISKL, 12"×18"L, 11"×17"L,
8
1
/
2
"×14"L, 8
1
/
2
"×11"L (80g/m
2
, 20lb.)
• 500 sheets: A5K (80g/m
2
, 20lb.)
• 100 sheets: A5L, B6JISL, A6L, 8
1
/
2
"×5
1
/
2
"L (80g/m
2
, 20lb.)
Staple:
• 2-19 sheets: 150 sets (A4K, 8
1
/
2
"×11"K) (80g/m
2
, 20lb.)
• 20-50 sheets: 150-60(A4K, 8
1
/
2
"×11"K) (80g/m
2
, 20lb.)
• 2-14 sheets: 100 sets (A4L, B5JISKL, 8
1
/
2
"×11"L) (80g/m
2
, 20lb.)
• 15-50 sheets:100-30 sets (A4L, B5JISKL, 8
1
/
2
"×11"L) (80g/m
2
, 20lb.)
• 2-14 sheets: 100 sets (A3L, B4JISL, 12"×18"L, 11"×17"L, 8
1
/
2
"×14"L)
(80g/m
2
, 20lb.)
• 15-30 sheets: 100-33 sets (A3L, B4JISL, 12"×18"L, 11"×17"L, 8
1
/
2
"×14"L)
(80g/m
2
, 20lb.)
• Staple capacity:
Without Mixed Size:
• 50 sheets: A4KL, B5JISKL, 8
1
/
2
"×11"KL (80g/m
2
, 20lb.)
• 30 sheets: A3L B4JISL, 12"×18"L, 11"×17"L, 8
1
/
2
"×14"L
(80g/m
2
, 20lb.)
With Mixed Size:
• 30 sheets (A3L / A4K, B4JISL / B5JISK, 11"×17"L / 8
1
/
2
"×11"K)
(80g/m
2
, 20lb.)
• Staple paper size:
A3L, B4JISL, A4KL, B5JISKL, 12"×18"L , 11"×17"L, 8
1
/
2
"×14"L,
8
1
/
2
"×11"KL
• Staple paper weight:
64-90g/m
2
, 17-24lb.
• Staple position
• 1 staples - 3 positions
• 2 staples - 2 positions
• Power consumption:
96W (power is supplied from the main unit)
• Dimensions (W×D×H)
657×613×960mm, 26.3"×24.5"×38.4"